Photo Booth ATA Case Set 'Do It Yourself' Cutouts - Black

Description
2 Reviews

* These 2 cases do not have any cutouts or trap doors. You have to customize these cases yourself to fit your specific equipment. *Note - These cases DO NOT LATCH TOGETHER FOR TRAVEL so after holes are cut there will be no lids to protect cutouts. You may want to devise some kind of cover. Perhaps a velcro on, or slip over vinyl cover can be made and used. We offer a "shoe box" type inexpensive lid (face cover) that can simply Velcro on over the front or back depending on where you made your cutouts.

Economical ATA style 2 case set to make your own customized photo booth is fun and easy! Simply cut the holes and trap doors into the 3/8" plywood case shell and lid by drilling a hole in one corner of the cutout then using a hand held jigsaw to finish the square cutout. Cases are complete with all the finest hardware on the market, dolly wheel kits, and a unique aluminum rail track that captures the front lid and gives it support all the way around the perimeter of the case. Four plastic pivot tabs are used to secure the lid. The bottom case has two surface mounted butterfly twist latches to connect the cases together and four rubber feet mounted on top. These four feet make a 'stand off' to prevent the recessed handle from touching the case above. We ship to Hawaii & Alaska as well as internationally, but can only provide free shipping to the lower 48 US states at this time. Please email, phone or text us for a quote for air, expedited, and international delivery options.

3/8" Plywood Construction
Hard PVC Laminate
3 Recessed Handles/Case
Ball Corners
Latchless Front Lids (4 pivot tabs are used)
Inside Track To Support Front Lid
Dolly Wheel Kits Included
Surface Butterfly Twist Latches To Connect Cases Together
Inside Dimensions Approx 35 1/4" x 23" x 15 1/4" Deep
Outside Dimensions Approx 36" x 24" x 16 1/4" Deep
Weighs Approximately 40 lbs/Case
Both Cases Same Size
Made In The USA

3/8" Plywood Construction
Outside Dimensions Approx 36" x 24" x 16 1/4" Deep
Inside Dimensions Approx 35 1/4" x 23" x 15 1/4" Deep
Surface Butterfly Twist Latches To Connect Cases Together

2 Reviews

5
Excellent Product

Posted by Tom on 15th Jul 2015

I bought this product in late 2014, just starting out with my photo booth business. I have since done about 25 events, all with the same booth, and these cases are holding up fantastic. Of particular note, is how snug the top case fits onto the bottom one, with the included built-in latches and rubber buffers. These measurements had to be exact to get this fit so perfect and snug. I have a decent amount of equipment inside, including a 45-pound printer, and hauling these around by their handles have not put even produced a slight amount of damage. I did not attach the given wheels, I think they would look a little corny as they would be facing the guests inside the booth, if attached. I would also note, that I did not have a particularly good background in cutting wood before putting in my own cuts on this product, and it was easy and simple enough. Just make sure to practice on similar pieces of plywood first, so you know you can get it right.
5
Save yourself $1200 by buying this

Posted by Unknown on 5th Jun 2013

I have a Entertainment company that offers Dj and Photo Booth service, I used a table with a computer and printer before this. The reason was that Photo Booth cases where anywhere from $1800 to $3200 dollars and I did not see the sense in spending that much money. I bought these from Road Cases USA and spent 2 hours on cutting the holes and it looks better then a $1800 dollar model i seen on ebay. To improve your business and save money do yourself a favor and buy these cases.

SKU:: RCMISC-ROAD-PHOTOCUT
UPC:
Condition:: New
Availability:: Usually Ships in 15 Business Days
Shipping:: Free Shipping